Friday, January 25, 2013

3.1 Blog write-up for Assignment 1

I'n the first assignment I learned quite a bit about robotic movement and perception:

  • When following a line always stop to turn, or you will end up far enough dis-aligned that PID cannot auto correct.
  • Make sure to put a delay on state changes, else the sensors will cause the states to change rapidly before actually completing the step, causing the robot to fail.
  • Sensors are not infallible. put in a margin of error.
  • do not try to implement the first solution you come up with before exploring less complicated possibilities; unless you want to spend hours creating a self correcting data structure, and adding a library for it.
  • simulation and real life are not the same, and the robot WILL act differently than it did in simulation with the same code. Make sure to test.
That is what comes to mind when I think about what I learned from the first assignment. Everything else is in the other write-up.

No comments:

Post a Comment